This what the trailer looked like originally, it was under sized for the load, the boat was to high on the trailer and that old wooden bunk for the bow had to go,

 

     This is what it lookes like now. As you can tell it is lower and I have added another 3500 torsion axel and dual fenders to make hauling the boat safer and ride better.

 

 

 

 

     As you can see here I have added some lateral braces to keep the supports verticle and some 3/8 bolts to keep them at the right height

 

 

 

 

 

    I have also added this guide which floated away the first time I launched the boat with it because the nuts holding it on vibrated off.

 

 

     

       I finally had to rearrange my lights and get them out of the water during launch and retrievel.